● Standards : ASTM D1646, ISO 289, AFNOR T43-004/005, BS 1673, DIN 537525 , GOST 10722-76,
      JIS K6300, TGL25-689
● Rotor Speed : 2 RPM
● Sample Volume : Two piece test specimen having a combined volume of 25 ± 3cm³
● Rotor Shaft Seal : Long life or Standard seals available, upgradable on request.

● Temperature: Microprocessor controlled, Calibrated range 100-200^oC or 200-400^oF,
                              Usable range 30-200^oC or 100-400^oF
● Printed Data Points(Basic Instrument) : Viscosity at specified time
      Scorch test - Initial viscosity, minimum viscosity, scorch times
      (t5, t35) or (t3, t18), Die temperatures at the end of test
● Graphic Output : Upper/lower die temperatures, Mooney Viscosity
● Analogue Output : Any one of the upper/lower die temperatures or Mooney viscosity
● Measurement Units: Temperature in ^oC or ^oF; viscosity in Mooney units
● Output Languages: English, French, German, Spanish, Dtch, Swedish or Italian
● Electrical : 100/110/120/130 VAC ± 10%, 60 ± 3 Hz, 10 amp single phase
                         200/220/240/260 VAC ± 10%, 50/60 ± 3 Hz, 5 amp single phase
                         Deviations from these ranges may affect performance
● Air Pressure : 60psi(4.2kg/cm²  or 414 kPa) minimum
● Dimensions :68 D X 132 H X 76D cm
● Weights :  280kg(616lbs) gross, 177kg(389lbs) net
● Suggested Bench Dimensions :  Minimum 86 W X 64~86 H X 71 D cm
                                                              not including PC or printer